#Floor structural floordesign wood install

The concrete floor together with any associated horizontal (e.g. With the thickness of the floor being at least 18mm, you can be sure it is stable enough to go over joists.

#Floor structural floordesign wood install

Where upper floors are required to support balconies and or masonry support systems, and horizontal joints are to be provided as part of the external envelope of a framed building, they should be suitably designed and detailed to cater for both thermal and moisture movements of the envelope, in addition to any residual floor deflection that may be expected from the supporting structure. The main reason you would need structural wood flooring is if you want to install over joists. on insulation above a structural sub-floor, or on a series of battens which has. Particular attention should be paid to edges of upper floors in flat slab constructions or floors without edge beams spanning over 5 meters. ated that the designer can design the floor to carry any specified load. Support of external envelope and projectionsĭeflection of concrete upper floors should be adequately monitored and controlled to ensure it does not adversely affect its proper functioning or appearance.

Steel beams should be protected by a suitably durable paint coating as detailed in Chapter 6.5 ‘Steelwork’. Structural continuity of the floor should be provided by the use of continuous decking fixed to joists on both sides of a transverse steel joist. There are many materials you can use when floor framing: standard dimensional lumber, heavy timber, open web joists, wooden I-joists, etc.

sized to allow an adequate bearing of the floor system.